A new device for in-line colorimetric quantification of polypropylene degradation under multiple extrusions

An in-line colorimeter that is able to quantify color changes in real time during extrusion was developed and validated. It is composed of LEDs emitting at three different wavelengths and a photocell that measures the intensity of the light transmitted through the polymer melt flow. The colorimeter was validated at the bench by employing colored aqueous solutions and in-line during the extrusion of a colored polypropylene. Furthermore, it was used to in-line quantify the color changes in a polypropylene as generated over multiple extrusions due to thermo-mechanical degradation. The technique was proved to be fast and suitable to measure color changes in real time during extrusion.     

Mechanical polishing,surface roughness,near‐surface deformation,and electrochemical corrosion of Alloy 690TT

The effects of mechanical grinding/polishing, surface roughness, and near‐surface deformation on the electrochemical corrosion behavior of thermally treated (TT) Alloy 690 were studied in a sodium chloride solution. The X‐ray photoelectron spectroscopy and transmission electron microscopy analyses revealed that mechanical grinding/polishing can change the ratio of the elements at the surface of the as‐received Alloy 690TT specimen by removing its Cr‐rich outer layer and causing deformation at the near‐surface microstructure, something which has a direct impact on the rate of the oxygen reduction reaction (ORR), the pitting potential (E_pit), and the corrosion potential (E_corr) of Alloy 690TT. It was observed that the ratio of Cr in the surface is a significant factor that controls the rate of the ORR and the corrosion parameters such as E_corr. Higher amounts of Cr at the surface accelerate the ORR. The near‐surface deformation shifts the E_pit values towards less positive potentials. It was also found that due to the different near‐surface chemical composition of the as‐received Alloy 690TT specimen compared with the ground and the polished specimens, the surface roughness parameters do not have a regular correlation with the rate of the ORR and the values of the E_corr and the E_pit. Only the passive current density increases when the surface roughness is increased. Copyright © 2015 John Wiley & Sons, Ltd.     

Capillary isoelectric focusing immunoassay as a new nanoscale approach for the detection of oligoclonal bands

The detection of oligoclonal bands (OCBs) in cerebrospinal fluid is an indicator of intrathecal synthesis of immunoglobulins which is a neurochemical sign of chronic inflammatory brain diseases. Intrathecally synthesized IgGs are typically observed in patients with multiple sclerosis. The current standard protocol for the detection of OCBs is IEF on agarose or polyacrylamide gels followed by immunoblotting or silver staining. These methods are time consuming, show substantial interlaboratory variation and cannot be used in a high throughput‐approach. We have developed a new nanoscale method for the detection of OCBs based on automated capillary IEF followed by immunological detection. Evidence for intrathecal IgG synthesis was found in all tested patients (n = 27) with multiple sclerosis, even in two subjects who did not have oligoclonal bands according to standard methods. The test specificity was at 97.5% (n = 19). Our findings indicate that the novel OCB‐CIEF‐immunoassay is suitable for the rapid and highly sensitive detection of OCBs in clinical samples. Furthermore, the method allows for a higher sample throughput than the current standard methods.     

Electrochemical characterization of MnO2 as electrocatalytic energy material for fuel cell electrode

 Development of inexpensive non Pt based high electrocatalytic energy materials is the need of the hour for fuel cell electrode to produce clean alternative green energy from synthesized bio alcohol using biomass. MnO₂, electro synthesized at different current density is found to be well performed electrocatalytic material, comparable to Pt, with higher current density, very low overvoltage for the electrochemical oxidation of methanol. From EIS study, the polarization resistance of the coated MnO₂ is found to be much low and electrical double layer capacitance is high, the effect increases with increase in current density of electro deposition. XRD, EDX and AAS analysis confirm the MnO₂ deposition. The morphology of SEM images exhibits an enhanced 3D effective substrate area, for electro oxidation of the fuel. A few nano structured grains of the deposited MnO₂ is also observed at higher current density. The fact supports that a high energetic inexpensive electro catalytic material has been found for fuel cell electrode to synthesis renewable energy from methanol fuel.     

多金核二氧化铈空心球用于硝基苯酚催化加氢

催化剂的微观结构在催化还原反应、有机物氧化反应及有机物转化反应中起着关键作用。本文利用无模板方法合成了多金核中空二氧化铈微球催化剂。将制备好的二氧化铈中空微球浸渍到一定浓度的氯金酸溶液中,然后多次洗涤除去表面吸附的氯金酸离子,最后通过硼氢化钠还原制成中空氧化铈微球包覆的多金核的核壳结构催化剂。将该核壳结构材料用于硝基苯酚加氢反应与金纳米粒子及氧化铈微球相比,多金核中空二氧化铈核壳结构表现出优越的活性和稳定性。通过这种浸渍洗涤再还原的简单方法合成的多金核二氧化铈催化剂有望应用于生物医药和能源环境等领域。     

利用基于Gouy-Chapman模型的离子有效电荷定量表征离子特异性效应

离子特异性效应在固-液界面反应中是普遍存在的. 近期研究指出, 在较低电解质浓度的某些体系中, 离子特异性效应可能并非来源于色散力、经典诱导力、离子半径或水合半径的大小等, 而是界面附近强电场中的离子极化作用. 这种作用可使界面附近的吸附态反号离子被强烈极化(高达经典极化的10⁴倍). 强烈极化的结果将导致离子在界面附近受到的库仑力远远超过离子电荷所能产生的库仑力, 这体现在离子的有效电荷将远大于离子的实际电荷. 因此胶体体系中基于这种强极化的离子有效电荷可以用来定量表征离子特异性效应的强度. 本研究在蒙脱石-胡敏酸混合悬液凝聚过程中发现了Na⁺、K⁺、Ca²⁺、Cu²⁺四种离子的离子特异性效应, 提出了基于激光散射技术测定离子有效电荷的方法, 并成功获得了被强烈极化后的离子有效电荷数值. 实验测得的Na⁺、K⁺、Ca²⁺、Cu²⁺四种离子的有效电荷值分别为: Z_{Na(effective)}=1.46, Z_K(effective)=1.86, Z_{Ca(effective)}=3.92, Z_{Cu(effective)}=6.48.该结果表明: (1) 离子在强电场中的极化将大大提高离子的有效电荷, 从而极大地增强离子所受的库仑作用力;(2) 离子的电子层数越多, 离子极化越强烈, 离子的有效电荷增加越多.     

Nanometer‐Scale Water‐ and Proton‐Diffusion Heterogeneities across Water Channels in Polymer Electrolyte Membranes

Nafion, the most widely used polymer for electrolyte membranes (PEMs) in fuel cells, consists of a fluorocarbon backbone and acidic groups that, upon hydration, swell to form percolated channels through which water and ions diffuse. Although the effects of the channel structures and the acidic groups on water/ion transport have been studied before, the surface chemistry or the spatially heterogeneous diffusivity across water channels has never been shown to directly influence water/ion transport. By the use of molecular spin probes that are selectively partitioned into heterogeneous regions of the PEM and Overhauser dynamic nuclear polarization relaxometry, this study reveals that both water and proton diffusivity are significantly faster near the fluorocarbon and the acidic groups lining the water channels than within the water channels. The concept that surface chemistry at the (sub)nanometer scale dictates water and proton diffusivity invokes a new design principle for PEMs.     

Raman spectroscopy of alkali halide hydration: hydrogen bond relaxation and polarization

The solute–solvent interaction of salts has a striking impact on various biological and industrial processes but its mechanism remains yet mysterious despite intensive studies since 1888 when Franz Hofmeister established the salt series. A combination of confocal Raman spectroscopy and contact angle measurements has enabled us to resolve the hydrogen bond relaxation (O:H―O, HB) and the associated charge polarization dynamics at different molecular site because of alkali halides hydration. Results show consistently that salt hydration softens the O:H phonon but stiffens H―O phonon cooperatively. The extent of HB relaxation and polarization is proportional to the electronegativity difference and ionic radius, following the order of Hofmeister series: X (R/η) = I (2.2/2.5) > Br (1.96/2.8) > Cl (1.81/3.0) > F (1.33/4.0) ≈ 0 for anions, and Y(R/η) = Na (0.98/0.9) > K (1.33/0.8) > Rb (1.49/0.8) > Cs (1.65/0.8) for cations. Observations suggest that ions create each an electric field that aligns, stretches, and polarizes water molecules, which relaxes the O:H―O bond cooperatively, depresses the molecular dynamics, and enhances the hydration shell viscosity and the skin stress. Exercises also demonstrate that Raman spectroscopy performs as a powerful tool for probing the molecular‐site‐resolved HB network relaxation dynamics in terms of phonon stiffness, molecular fluctuation dynamics, and phonon abundance transition under external stimulus. Copyright © 2016 John Wiley & Sons, Ltd.     

两相流显微PIV/PTV系统的开发

开发了一个能同时测量两相流中两相速度和细颗粒尺寸分布的显微PIV/PTV系统,其硬件系统包括大功率连续激光器、显微镜、高速摄像机;软件系统由改进的球形颗粒图像识别算法、各种图像处理算法和各种先进的PIV/PTV算法组成。其中改进的圆弧识别算法能够进行更准确地进行曲线分割而能对充满噪音并相互重叠的颗粒图像给出较好的识别结果。应用该PIV系统,可以在微秒和微米数量级上捕获细颗粒/气泡图像,并能较准确地同时得到两相速度、颗粒尺寸和浓度分布。对焚香可吸入颗粒物进行了速度和尺寸的同时测量,得到了较满意的结果。     

基于光学和扫描显微平台的微尺度实验力学检测技术和装置研究

本文基于光学和扫描显微平台,介绍了本研究组在微尺度实验力学检测技术和设备方面的最新研究成果。在检测技术方面涉及显微散斑干涉技术、微标记阵列检测技术、晶粒变形分析技术、光学探针动静态变形分析技术;在检测系统和装置方面介绍了新近开发的双视场薄膜检测系统、散斑微干涉系统、微标记检测平台、AFM和SEM单轴拉伸装置、三维微定位与加载系统、微力传感器及其标定装置、微动平台驱动装置等。探讨了微尺度实验力学检测中的问题和新的检测技术,给出了一些典型的应用和相关装置。